Epson 1520 User Manual - Page 116
Using the Head Cleaning Utility, Maintenance and Transportation
UPC - 010343813328
View all Epson 1520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Maintenance and Transportation Note: If either Ink Out light is flashing or on, you need to replace the ink cartridge instead. See page 6-4 for instructions. Caution: Never turn off the printer while the Pause light is flashing. If, however, the Pause light is still flashing after 10 minutes and the printer is not moving or making noise, you may turn off the printer. Using the Head Cleaning Utility Follow these steps to run the utility from a Windows or a Macintosh computer connected directly to the printer: 1. Make sure the printer is turned on but not printing. 2. To clean the black print head, make sure the Ink Out B light is off. To clean the color print head, make sure the Ink Out A light is off. 3. Access the Main printer settings dialog box as described in Chapter 1. 4. Click the Utility tab (Windows) or the Utility button (Macintosh). You see the Utility menu. 5. Click the Head Cleaning icon. 6. Follow the instructions on the screen to clean the print heads. Cleaning each head takes about two minutes, during which the printer makes some noise and the Pause light flashes. When the Pause light stops flashing, you need to run a nozzle check to test the print quality and reset the cleaning cycle. 7. Make sure paper is loaded in the printer and click Print nozzle check pattern (Windows) or Confirmation (Macintosh), and then click Next. See page 6-4 for instructions on examining the nozzle check pattern. If your print quality has not improved, repeat the steps above. If you don't notice any improvement after doing this two or three times, check the print quality solutions in Chapter 7. 6-2