Epson 1520 User Manual - Page 144
Using Optional Interfaces, work properly.
UPC - 010343813328
View all Epson 1520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Using Optional Interfaces 2. Disconnect any interface cables from the back of the printer. 3. Use a Phillips-head screwdriver to remove the two screws securing the interface cover. Then lift off the cover. 4. Set any switches and jumpers on the interface board as described in its manual. If your board has a jumper labeled JG, make sure that you set it to ON, or the board will not work properly. 5. Slide the interface board along the slots on both sides of the compartment. Push it in firmly to fully insert the board's connector into the printer's internal socket. 6. Secure the interface board in the slot with the two screws included with the board. A-3
Using Optional Interfaces
A-3
2.
Disconnect any interface cables from the back of the
printer.
3.
Use a Phillips-head screwdriver to remove the two screws
securing the interface cover. Then lift off the cover.
4.
Set any switches and jumpers on the interface board as
described in its manual. If your board has a jumper labeled
JG, make sure that you set it to
ON
, or the board will not
work properly.
5.
Slide the interface board along the slots on both sides of the
compartment. Push it in firmly to fully insert the board’s
connector into the printer’s internal socket.
6.
Secure the interface board in the slot with the two screws
included with the board.