Epson 1520 User Manual - Page 55

Printing on Special Media To load up to 30 ink jet cards, place them printable side down, with the short edge leading into the feeder. Remove the rear paper support guide and reinstall it backward, sliding it forward to the edge of the cards. rear paper support guide Note: Make sure that paper isn't loaded in the manual feeder at the top of the printer before sending your print job. If paper is loaded in the manual feeder, the printer will print on it instead of the paper in the built-in sheet feeder. 10. Lower the output tray and slide out the output tray extension. 11. Now follow the instructions in Chapters 1 or 2 to select the correct Paper Source, Paper Size, and other settings in your printer software. Then send a print job.  If you run out of paper while printing, reload the sheet feeder and press the Pause button to continue.  If the ink smears on your document, set the thickness lever to the + position and reprint; see page 3-7.  If your margins are not where you like them, adjust them in your application software. However, if the problem seems to be with your paper's loading position, you can change it using the Micro Adjust buttons; see page 3-20 for instructions. 3-10