Epson 1520 User Manual - Page 58

Printing on Special Media You can load one envelope in the manual feeder face up with the flap edge leading into the feeder. Gently slide the envelope into the manual feeder until the printer pulls it in. arrow Note: Make sure that paper isn't loaded in the manual feeder at the top of the printer before sending a print job for paper in the built-in sheet feeder. If paper is loaded in the manual feeder, the printer will print on it instead of the paper in the built-in sheet feeder. If the paper doesn't load straight, press the Load/Eject button to eject the paper; then load it again. 7. Now follow the instructions in Chapters 1 or 2 to select the correct Paper Source, Paper Size, and other printer software settings. Then send a one-page print job. 8. When your print job is finished, the Pause and Paper Out lights come on. Press the Pause button to turn off the lights.  If you want to print another document in the manual feeder, load the paper as described above. To print on paper in the built-in sheet feeder, just send a print job.  If the ink smears on your document, set the thickness lever to the + position and reprint; see page 3-7.  If your margins are not where you like them, adjust them in your application software. However, if the problem seems to be with your paper's loading position, you can change it using the Micro Adjust buttons; see page 3-20 for instructions. 3-13