Epson C7500G Technical Reference Guide - Page 175
Changing Printer Settings and Replacing the Printer
View all Epson C7500G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Chapter 4 Application Development Information Changing Printer Settings and Replacing the Printer When replacing from the printer using ZPL II commands without changing the installed applications and drivers, you need to match the printer settings and the settings of the printer using ZPL II commands. Also, if you printed a color background onto a pre-printed label paper in monochrome, perform settings using the following procedure. Connect this product to a computer used for settings USB Interface Connect this product to the computer used for settings via a USB cable. Ethernet Interface Connect this product to the network. Setting the USBInformationSetting Overwriting the USB ID Setting the IP Address Use EpsonNet Config or the panel switch and set an IP address identical to that of the printer before replacing. Setting with the PrinterSetting Setting the printer resolution and monochrome print mode Set to monochrome print mode based on the resolution of the printer using ZPL II commands. 4 Registering Preset Images • Register images • Set presets Printing Setting with the PrinterSetting Adjusting Font Width When you set the monochrome print mode, preset images will be color. Connect this product to a computer used for settings Connect this product to the computers used for settings with a USB cable, or to the network. See "Rear Side" on page 21 or "Connecting the Interface Cable" on page 41. 175