Epson C7500G Technical Reference Guide - Page 67
Network settings, Select [I/F SETUP] and press the OK button.
View all Epson C7500G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Chapter 2 Setup Network settings Set the IP address of the product following the steps below. When using the product with an Ethernet connection, it is necessary to setup the network. When using with a USB connection, network settings are not necessary. When performing network settings, obtain the necessary information from a network administrator. The network setting can be checked by printing the status sheet. See "Printing the status sheet (Network settings)" on page 86. 1 Turn on the product. 2 Press the (Menu) button to display the menu. 3 Select [I/F SETUP] and press the OK button. 2 4 Select [NETWORK SETUP] and press the OK button. 5 Select [IP ADDRESS] and press the OK button. 6 Select [AUTO] or [MANUAL]. When [AUTO] is selected, the network settings are complete. When [MANUAL] is selected, go to Step 7 and set IP address, etc. 7 Select [IP ADDRESS] and press the OK button. 8 Enter the IP address. Use the button to select a number and the select the digit to be changed. buttons to 67