Epson C7500G Technical Reference Guide - Page 196
Paper detection method, The label sensor and black mark sensor detect the position of the paper.
View all Epson C7500G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
Paper detection method Sensor Judging method Label sensor (Transmissive photo interrupter) Black mark sensor (Reflective photo interrupter) The label sensor and black mark sensor detect the position of the paper. When using die-cut label without black marks, the light transmission rates must be: 40 % or higher for the backing paper, and 23 % or lower for the labels. When using paper with black marks, the black mark reflectance rate must be 10 % or lower, and the white reflectance rate is 70 % or higher. When preprinting on the back of the continuous paper, do not preprint on the area where preprinting is prohibited that is shown in the figure below to avoid affecting paper detection. 15 mm { 0.59" } 15 mm { 0.59" } Paper feed direction Paper feed direction Back 13 mm { 0.51"} Front 13 mm { 0.51"} Paper Area where preprinting is prohibited 196