Epson C7500G Technical Reference Guide - Page 192
Die-cut labelGap, Label edge R
View all Epson C7500G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Die-cut label(Gap) Backing paper width Edge R Label length Gap between labels Edge cutoff Media type Media source Backing paper width Label width Label length Gap between labels Left and right outer edges Label edge R Paper thickness Paper core External diameter Winding direction Label width Edge cutoff Backing paper Label area Plain label / Matte label / Synthetic label / Glossy label Roll paper 50 mm to 112 mm {1.97 to 4.41"} 46 to 108 mm {1.81 to 4.25"} 25.4 to 600 mm {1 to 23.62"} 3 to 6 mm {0.12 to 0.24"} 2 0.5 mm {0.08 0.020"} 1.5 mm {0.06"} or less Plain label/ Matte label/ Synthetic label: 0.129 to 0.236 mm {0.005 to 0.009"} (reference values) Glossy label: 0.167 to 0.182 mm {0.007 to 0.007"} (reference values) Internal diameter: 76.2 0.5 mm {3 0.020"} External diameter: 82.2 mm {3.24"} or more Maximum 203.2 mm {8"} Printing face must be facing outside. Do not use the paper with a hole or cutout. If the backing is synthetic paper or film, it will be difficult to cut by hand even if there is a per- foration, so do not use the perforation. 192