Epson C7500G Technical Reference Guide - Page 27

Chapter 1 Product Overview LED LCD Printer Status Description (Power) LED Status LED Pause LED Paper LED Ink LED Idling (with power POWER SAVING saving) ●●- - - * * * * * If the product does not operate for 30 minutes or more while the power is ON, it moves to the power saving mode. PRINTING * * * * Printing * A beep sounds when printing is done. 1 WORKING * * * * After printing is done, the printer moves to * idling PAUSE ●- ●- - * * * * Pause * When the Pause button is pushed during printing, the printer becomes this status. It is possible to go to the setting mode from this state. MENU ●✓- - - * * * * Menu * When the Menu button is pushed, the printer becomes this status. Canceling the jobs CANCELING JOB ●- ●- - * * * * * When the Cancel button is pushed during printing, print jobs are canceled, printing is interrupted and print data inside the printer are deleted. Nozzle Verification PRINTING-NOZZLE Technology is CHECK DISABLED disable(*) * * * * * When dot dropouts cannot be detected due to low environmental temperature, the LCD display shows a message. Printing continues. NOZZLE CLOGGED Unrecoverable nozzle This display is shown when dropouts happen (*) * unrecoverable nozzle dropouts happen. Printing continues. Nozzle clogged (*) NOZZLE CLOGGED CHECK THE PRINT PRESS PAUSE TO CONTINUE Printing is paused temporarily, since nozzle dropouts happened during printing. Printing restarts when the Pause button is pushed. When canceling printing, push and hold the CANCEL button for two seconds or more before pushing the Pause button. button and button switch the LCD display. 27