Epson C7500G Technical Reference Guide - Page 95

Layout settings Chapter 3 Handling Item Media layout name Defined media layout Media form Layout Information (mm) Borderless printing Feather edges Description Sets the media layout name. Enter a name. 3 The defined media layout in the list is displayed. Sets the media form. Sets the media width, label width, left gap, label length and blackmark interval. Layout information that can be set changes depending on the media form. Before setting the layout information, set the media form. When checked, the printing range can be expanded. When the margins are zero, the print may extend outside of the media/ label. Use it accordingly. When [Feather edges] is checked, gradation processing is performed on the margin areas. It can be set only when [Borderless printing] is checked. When printing on long labels, depending on the media, the printing result may not reach the specified length. As a result, provided the paper feed direction is up, the bottom edge of the label may be blank. If this blank bothers you, try the method below. Step 1: Check the printing result. Step 2: Add the blank section to the specified label length in the layout setting menu. 95