Epson C7500G Technical Reference Guide - Page 4

Cautions on Power Supply WARNING  Do not allow dust or foreign materials to adhere to the power plug. Accumulated dust or foreign material may cause electric shock or fire.  Insert the power plug securely into the socket. Failure to insert the plug securely may cause electric shock or fire.  Use only the power cable supplied with this product. In addition, use the supplied power cable only for this product. Other use may cause electric shock or fire.  Do not use a damaged power cable. Doing so may cause electric shock or fire. Contact a Seiko Epson service center for advice if the power cable is damaged. Observe the following points so as not to damage the power cable:  Do not modify the power cable.  Do not place heavy objects on the power cable.  Do not forcibly bend, twist or pull the power cable.  Do not locate the power plug near a heating device.  Do not hold the power plug with a wet hand. Doing so may cause electric shock.  Do not connect too many power cables to one outlet. Doing so may cause fire.  Disconnect the power plug from the outlet on a periodical basis, and clean the areas around and between the blades. Leaving the power plug connected to the outlet for a long period of time may cause dust to accumulate on the blade root, resulting in a short-circuit or fire.  Hold the plug and do not pull the cable when disconnecting the power plug from the outlet. Pulling the cable may damage the cable or deform the plug, causing electric shock or fire. To ensure safety, unplug this product before leaving it unused for an extended period. CAUTION 4