HP 635n HP Jetdirect Print Server Administrator's Guide - Page 137
IPv6 IPX/SPX Protocol Information
UPC - 882780301016
View all HP 635n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Table 8-6 IPv4 Section (continued) Message Description or RARP SERVER: BOOTP/DHCP SERVER: Displayed during initialization while the HP Jetdirect print server attempts to obtain its TCP/IP configuration from a BOOTP or DHCP server. The temporary address displayed is 0.0.0.0. TFTP SERVER: The IP address of the system where the TFTP configuration file is located. During initialization, the temporary address 0.0.0.0 is displayed. Not Specified: Indicates that a TFTP server has not been not been set. WEB JETADMIN URL: If the HP Jetdirect print server is found on the network by HP Web Jetadmin, the URL of the host system used for HP Web Jetadmin services is displayed. The URL is limited to two lines and may be truncated. Not Specified: Indicates that the URL of the Web Jetadmin host system could not be identified or is not configured. MDNS SERVICE NAME Specifies a name (alphanumeric string) assigned to this device or service. This name is persistent and is used to resolve a particular device or service if socket information (such as the IP address) changes from session to session. Apple mDNS will display this service. The default service name is the printer model and the LAN Hardware (MAC) address. IPv6 Section The following table includes items displayed under the IPv6 section of the configuration page. Table 8-7 IPv6 Section Message LINK-LOCAL: STATELESS: DHCPV6: MANUAL: Description Specifies the IPv6 Link Local address configured on the print server. Not Configured: A link local address has not been configured. Specifies IPv6 Stateless addresses configured on the print server. Not Configured: A Stateless address has not been configured. Specifies the print server IPv6 stateful address configured by a DHCPv6 server. Not Configured: A stateful address has not been configured. Specifies an IPv6 address manually configured on the print server, for example, through the printer control panel or the embedded Web server. Not Configured: An address has not been manually configured. IPX/SPX Protocol Information Information in this section of the Jetdirect configuration page is described in Table 8-8 IPX/SPX Configuration Information. For error messages, see Table 8-12 Error Messages. ENWW HP Jetdirect Configuration Page 127