HP 635n HP Jetdirect Print Server Administrator's Guide - Page 87
Dlc/llc, Snmp
UPC - 882780301016
View all HP 635n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Table 4-10 AppleTalk Settings (continued) Item Description Click the Refresh selected zone Info button to refresh the list of available zones. DLC/LLC Using the checkbox provided, you can enable (check) or disable (clear) the DLC/LLC (Data Link Control/Logical Link Control) protocols on the HP Jetdirect print server. If the checkbox is clear, DLC/ LLC protocols are disabled. SNMP You can specify or change the SNMP (Simple Network Management Protocol) parameters provided. See Table 4-11 SNMP Settings. CAUTION If you use HP Web Jetadmin to manage your devices, you should use HP Web Jetadmin to seamlessly configure SNMP v3 and other security settings on the print server. Using the embedded Web server to create the SNMP v3 account will erase any existing SNMP v3 accounts. In addition, the SNMP v3 account information will need to be implemented on the SNMP management application. For more information, see SNMP v3. Table 4-11 SNMP Settings Item Enable SNMPv1/v2 readwrite access Description This option enables the SNMP v1/v2c agents on the print server. Custom community names can be configured to control management access to the print server. An SNMP Set Community Name is a password to be able to configure (or "write") SNMP information on the HP Jetdirect print server. An SNMP Get Community Name is a password to retrieve (or "read") SNMP information on the HP Jetdirect print server. An incoming SNMP SetRequest or GetRequest command must contain the appropriate Set or Get community name before the print server will respond. A community name must be ASCII characters and can be up to 255 characters long. The default Get community name is "public", which can be disabled to restrict access by checking the checkbox provided. NOTE If "public" is disabled, some port monitors or discovery utilities may not operate properly. Enable SNMPv1/v2 readonly access Disable SNMPv1/v2 Enable SNMPv3 This option enables the SNMP v1/v2c agents on the print server, but limits access to readonly. Write-access is disabled. The default Get community name "public" is automatically enabled. This option disables the SNMP v1/v2c agents on the print server, which is recommended for secure environments. If SNMP v1/v2c is disabled, some port monitors or discovery utilities may not operate properly. (Full-featured HP Jetdirect print servers only) This option enables (check) or disables (clear) the SNMP v3 agent on the print server. ENWW Networking Tab 77