HP 635n HP Jetdirect Print Server Administrator's Guide - Page 40
TFTP Configuration File Parameters continued, TCP/IP Raw Print Ports, TCP/IP Access Control
UPC - 882780301016
View all HP 635n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Table 3-2 TFTP Configuration File Parameters (continued) ftp-printing: (or ftp-config:, ftp:) ■ Enables or disables the ability to print through FTP: 0 disables, 1 (default) enables. ipp-printing: (or ipp-config:, ipp:) ■ Enables or disables the ability to print through IPP: 0 disables, 1 (default) enables. lpd-printing: (or lpd-config:, lpd:) ■ Enables or disables LPD (Line Printer Daemon) printing services on the Jetdirect print server. 0 disables, 1 (default) enables. banner: ■ A port-specific parameter that specifies printing an LPD banner page. 0 disables banner pages. 1 (default) enables banner pages. interlock: (or interlock-mode:) ■ Specifies whether an acknowledgement (ACK) on all TCP packets is required before the printer is allowed to close a Port 9100 print connection. A Port Number and Option value are specified. For current HP Jetdirect print servers, the Port Number is 1. Option value 0 (default) disables interlock, 1 enables. For example, "interlock 1 1" specifies Port 1, interlock enabled. buffer-packing: (or packing:) ■ Enables or disables buffer packing for TCP/IP packets. 0 (default): is normal, the data buffer is packed before sending to the printer. 1: disables buffer packing, data is sent to the printer as it is received. write-mode: ■ Controls the setting of the TCP PSH flag for device-to-client data transfers. 0 (default): disables this option, flag is not set. 1: all-push option. The push bit is set in all data packets. mult-tcp-conn: ■ Enables or disables multiple TCP connections. 0 (default): allows multiple connections. 1: disables multiple connections. TCP/IP Raw Print Ports raw-port: (or addrawport:) ■ Specifies additional ports for printing to TCP port 9100. Valid ports are 3000 to 9000, which are application-dependent. TCP/IP Access Control allow: netnum [mask] ■ Makes an entry into the host access list stored on the HP Jetdirect print server. Each entry specifies a host or network of hosts that are allowed to connect to the printer. The format is "allow: netnum [mask]" where netnum is a network 30 Chapter 3 TCP/IP Configuration ENWW