HP 635n HP Jetdirect Print Server Administrator's Guide - Page 85
Network Settings, IPX/SPX, Apply
UPC - 882780301016
View all HP 635n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Network Settings The Network Settings pages allow you to set or change configuration parameters for IPX/SPX, AppleTalk, DLC/LLC, and SNMP protocols. To assign a parameter setting, enter the desired value and click Apply. IPX/SPX The IPX/SPX tab allows you to configure IPX/SPX (Internet Packet Exchange/Sequenced Packet Exchange) parameters on the HP Jetdirect print server for operation on a Novell NetWare or IPX/ SPX-compatible network (such as a Microsoft network). See Table 4-9 IPX/SPX Settings for a description of items on this page. CAUTION If you are using direct-mode printing over IPX/SPX on a Microsoft network, do not disable IPX/SPX. For a Novell NetWare network: ■ The embedded Web server may be used to select Queue Server Mode parameters in a Novell Directory Services (NDS) environment. ■ You cannot create the NDS print server, printer, and queue objects using the embedded Web server. To create these objects, use other available tools or utilities. Table 4-9 IPX/SPX Settings Item IPX/SPX Enable IPX/SPX Frame Type Description Enables or disables the IPX/SPX protocols on the HP Jetdirect print server. If the checkbox is empty, IPX/SPX is disabled. Specify the IPX/SPX frame type to be used by the HP Jetdirect print server on your network. After a frame type has been configured, all others will be counted and discarded. ■ All Frame Types (Auto): senses all frame types and configures the first one detected (default). ■ Ethernet 802.3 (EN_8023): limits the frame type to IPX over IEEE 802.3 frames. ■ Ethernet II (EN_II): limits the frame type to IPX over Ethernet frames. ■ Ethernet 802.2 (EN_8022): limits the frame type to IPX over IEEE 802.2 with IEEE 802.3 frames. ■ Ethernet SNAP (EN_SNAP): limits the frame type to IPX over SNAP with IEEE 802.3 frames. SAP Interval Print Server Name NDS Tree Name Specifies the time interval (in seconds) that the HP Jetdirect print server waits to send Service Advertising Protocol (SAP) messages, which are broadcast to advertise its service capabilities on a Novell NetWare network. To disable SAP messages, use the value "0". 60 is the default value. Specify a NetWare printer name for the HP Jetdirect print server (alphanumeric characters only). The default name is NPIxxxxxx, where xxxxxx are the last six digits of the HP Jetdirect print server's LAN hardware (MAC) address. Specify the name of the NDS tree for this device. The NDS (Novell Directory Services) tree name refers to the name of the organizational tree used by your network. To disable NDS support, leave this field blank. ENWW Networking Tab 75