HP 635n HP Jetdirect Print Server Administrator's Guide - Page 174
Classic Control Panel
UPC - 882780301016
View all HP 635n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Classic Control Panel Classic control panels can typically display two lines of 16 characters each. As described in Table C-1 HP Jetdirect Classic Control Panel Menu, the HP Jetdirect control panel menu allows you to enable or disable network protocols, and configure selected network parameters. On the control panel display, an asterisk (*) is used to identify the selected value. Table C-1 HP Jetdirect Classic Control Panel Menu Menu Item CFG NETWORK= TCP/IP= IPX/SPX= DLC/LLC= ATALK= CFG TCP/IP= Description Selects whether or not you want to access the Jetdirect menu. NO (default): Bypass the HP Jetdirect menu. YES: Access the HP Jetdirect menu. You must change this to YES* each time you want to access the menu. Identifies whether the protocol stack is enabled or disabled. ON (default): The protocol is enabled. OFF: The protocol is disabled. Selects whether you want to access the TCP/IP menu and set TCP/IP protocol parameters. NO (default): Bypass the TCP/IP menu items. YES: Access the TCP/IP menu items. ■ BOOTP=YES* enables IPv4 configuration by a BootP Server. ■ DHCP=YES* enables IPv4 configuration by a DHCP Server. If DHCP=YES* and the print server has a DHCP lease, you can choose to configure the following DHCP settings: ■ RELEASE: Choose YES to release, or NO to save, the current DHCP lease. ■ RENEW: Choose YES to renew the current DHCP lease, or NO to not renew the DHCP lease. ■ AUTO IP=YES* will automatically assign a link-local IPv4 address in the form 169.254.x.x. 164 Appendix C The HP Jetdirect EIO Control Panel Menu ENWW