HP 635n HP Jetdirect Print Server Administrator's Guide - Page 142

HP Jetdirect Configuration s, Error Messages continued

Get HP 635n - JetDirect IPv6/IPsec Print Server PDF manuals and user guides
UPC - 882780301016
View all HP 635n manuals
Add to My Manuals
Save this manual to your list of manuals

Page 142 highlights

Table 8-12 Error Messages (continued) Error Code and Message Description 12 LAN ERROR - NO LINKBEAT With a wired Ethernet port connected, this message is displayed if Link Beat is not sensed. Check the network cable, and verify that the concentrator/hub is providing Link Beat. 13 NETWORK RECONFIG - MUST Reset or power off/on the HP Jetdirect print server to enable new configuration values. REBOOT 14 DISCONNECTED The Novell NetWare protocol is disconnected. Check the server and the print server. 15 CONFIGURATION ERROR (Ethernet) The configuration information for the NetWare functions is not stored correctly on the HP Jetdirect print server. Use the installation software, embedded Web server, or other tools to reconfigure the print server. If this error persists, there may be a problem with the HP Jetdirect print server. 16 NOT CONFIGURED (Ethernet) The HP Jetdirect print server has not been configured for NetWare. Use the installation software, embedded Web server, or other tools to configure the print server for NetWare networks. 17 UNABLE TO FIND SERVER (Ethernet) The HP Jetdirect print server was unable to find the NetWare print server (Remote Printer mode) or file server (Queue Server mode). (There was no response to service queries for advertising print servers or file servers that matched the configured print server or file server name.) Make sure that the print server or file server is running and that the print server or file server name configured on the HP Jetdirect print server matches the actual name used by the print server or file server. Also make sure that all cables and routers are functioning correctly. 18 PASSWORD ERROR The HP Jetdirect print server detected that the password for the NetWare print server object is wrong. Use a NetWare utility (such as PCONSOLE) to erase the password for the print server object. When the HP Jetdirect print server logs on again, it sets a new password. NOTE When multiple file servers are configured, the error is only displayed on the configuration page if none of the file servers are connected. 19 NO QUEUE ASSIGNED The HP Jetdirect print server detected that the print server object has not been assigned any queues to service. Assign queues to the print server object using printer installation or NetWare utilities. NOTE When multiple file servers are configured, the error is only displayed on the configuration page if none of the file servers were successfully connected. 1A PRINTER NUMBER NOT DEFINED A NetWare printer number for this printer has not been configured. Assign a valid printer number to the HP Jetdirect print server. Use a NetWare utility (such as PCONSOLE), the Jetdirect embedded Web server, or other tool to assign a printer number. 1B PRINTER NUMBER IN USE The NetWare printer number assigned to the printer is already in use by another printer. Assign an unused printer number. This may also occur when a printer is powered off/on, in which case the error goes away after the print server times out and detects the lost connection. 1C PRINT SERVER NOT DEFINED The file server does not have a print server object that corresponds to the specified NetWare node name. Use printer installation software, a NetWare utility (such as PCONSOLE), or other tool to create the print server object. When the HP Jetdirect print server is configured for multiple file servers, the error is only displayed on the configuration page if none of the file servers made the connection. 132 Chapter 8 HP Jetdirect Configuration Pages ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
Error Code and Message
Description
12 LAN ERROR - NO LINKBEAT
With a wired Ethernet port connected, this message is displayed if Link Beat is not
sensed. Check the network cable, and verify that the concentrator/hub is providing
Link Beat.
13 NETWORK RECONFIG - MUST
REBOOT
Reset or power off/on the HP Jetdirect print server to enable new configuration values.
14 DISCONNECTED
The Novell NetWare protocol is disconnected. Check the server and the print server.
15 CONFIGURATION ERROR
(Ethernet) The configuration information for the NetWare functions is not stored
correctly on the HP Jetdirect print server. Use the installation software, embedded
Web server, or other tools to reconfigure the print server. If this error persists, there
may be a problem with the HP Jetdirect print server.
16 NOT CONFIGURED
(Ethernet) The HP Jetdirect print server has not been configured for NetWare. Use
the installation software, embedded Web server, or other tools to configure the print
server for NetWare networks.
17 UNABLE TO FIND SERVER
(Ethernet) The HP Jetdirect print server was unable to find the NetWare print server
(Remote Printer mode) or file server (Queue Server mode). (There was no response
to service queries for advertising print servers or file servers that matched the
configured print server or file server name.)
Make sure that the print server or file server is running and that the print server or file
server name configured on the HP Jetdirect print server matches the actual name
used by the print server or file server. Also make sure that all cables and routers are
functioning correctly.
18 PASSWORD ERROR
The HP Jetdirect print server detected that the password for the NetWare print server
object is wrong. Use a NetWare utility (such as PCONSOLE) to erase the password
for the print server object. When the HP Jetdirect print server logs on again, it sets a
new password.
NOTE
When multiple file servers are configured, the error is only displayed
on the configuration page if none of the file servers are connected.
19 NO QUEUE ASSIGNED
The HP Jetdirect print server detected that the print server object has not been
assigned any queues to service. Assign queues to the print server object using
printer installation or NetWare utilities.
NOTE
When multiple file servers are configured, the error is only displayed
on the configuration page if none of the file servers were successfully
connected.
1A PRINTER NUMBER NOT
DEFINED
A NetWare printer number for this printer has not been configured. Assign a valid
printer number to the HP Jetdirect print server. Use a NetWare utility (such as
PCONSOLE), the Jetdirect embedded Web server, or other tool to assign a printer
number.
1B PRINTER NUMBER IN USE
The NetWare printer number assigned to the printer is already in use by another
printer. Assign an unused printer number. This may also occur when a printer is
powered off/on, in which case the error goes away after the print server times out
and detects the lost connection.
1C PRINT SERVER NOT DEFINED
The file server does not have a print server object that corresponds to the specified
NetWare node name. Use printer installation software, a NetWare utility (such as
PCONSOLE), or other tool to create the print server object.
When the HP Jetdirect print server is configured for multiple file servers, the error is
only displayed on the configuration page if none of the file servers made the
connection.
Table 8-12
Error Messages (continued)
132
Chapter 8
HP Jetdirect Configuration Pages
ENWW