HP 635n HP Jetdirect Print Server Administrator's Guide - Page 88

Table 4-11 SNMP Settings (continued) Item Description When enabled, an SNMP v3 account must be created on the print server, and the account information must be implemented on the SNMP v3 management application. You may create an account by providing the following information: User Name: the SNMP v3 account user name. Authentication Key: a 16-byte hexadecimal value for authenticating the SNMP packet contents using the Message Digest Algorithm 5 (MD5, RFC 1321). Privacy Key: a 16-byte hexadecimal value for encrypting the data portion of the SNMP packet using the Data Encryption Standard (DES) algorithm. Context Name: the view context in which this user can access SNMP objects. It is always "Jetdirect". Other Settings This item provides access to a variety of management and printing configuration options. The following tabs are provided: ■ Misc. Settings: for enabling miscellaneous advanced protocols and functions ■ Firmware Upgrade: to update your HP Jetdirect print server with new features and enhancements ■ LPD Queues: for setting up print queues used in printing under LPD (line printer daemon) printing services ■ Support Info: to set up the Support link located under Other Links in the left margin ■ Refresh Rate: to set the time interval (in seconds) for embedded Web diagnostic page updates Misc. Settings The Miscellaneous Settings parameters allow you to set a variety of advanced protocols and features, as described below. See Table 4-12 Miscellaneous Settings. Table 4-12 Miscellaneous Settings Item SLP Config Telnet Config mDNS Multicast IPv4 Description Enable or disable SLP (Service Location Protocol), used by selected client application software to automatically discover and identify the HP Jetdirect print server. If SLP will use multicast protocols, Multicast IPv4 must be enabled. Enable or disable access to HP Jetdirect configuration parameters using Telnet. For more information, see TCP/IP Configuration. Enable or disable Multicast Domain Name System (mDNS) services. mDNS is typically used on small networks for IP address and name resolution (through UDP port 5353) where a conventional DNS server is not used. For mDNS operation, Multicast IPv4 must be enabled. Enable or disable the receipt and transmission of IP version 4 multicast packets by the print server. If this parameter is disabled, other protocols that use multicast protocols, such as mDNS and SLP, may also be disabled without notification. 78 Chapter 4 HP Jetdirect Embedded Web Server (V.31.xx) ENWW