HP 635n HP Jetdirect Print Server Administrator's Guide - Page 86

Table 4-9 IPX/SPX Settings (continued) Item Description NDS Context The print server's NDS context refers to the NDS container or organizational unit that contains the print server object. Print queue and device objects can be located anywhere within the NDS tree, but the HP Jetdirect print server must be configured with the fullyqualified print server object name. For example, if the print server object is found in the container "marketing.mytown.lj", the fully qualified print server context name (CN) is: "OU=marketing.OU=mytown.O=lj" (where OU is an Organization Unit container and O is an Organization container within the NDS tree). The print server will also accept "marketing.mytown.lj". To disable NDS support, leave this field blank. NOTE NDS objects cannot be created by the embedded Web server. Job Poll Interval PJL Configuration Specifies the time interval (seconds) that the HP Jetdirect print server will wait to check for print jobs in a print queue. For Printer Job Language (PJL) parameters, enable (check) or disable (clear) the parameters provided: ■ Banner Page (for printing separator pages between print jobs) ■ End-Of-Job Notification (if received from the printer, an end-of-job message will be forwarded to a client application) ■ Toner Low Notification (if received from the printer, the HP Jetdirect print server will forward a "toner low" message to a client application) AppleTalk The AppleTalk tab allows you to configure selected AppleTalk settings on the HP Jetdirect print server. See Table 4-10 AppleTalk Settings for a description of items on this page. NOTE The AppleTalk parameters displayed include the AppleTalk printer types that are advertised on the network. The HP Jetdirect print server supports AppleTalk Phase 2 only. Table 4-10 AppleTalk Settings Item Description AppleTalk Enable checkbox Enable (check) or disable (clear) the AppleTalk protocol on the print server. If AppleTalk is enabled, AppleTalk parameters stored on the print server are displayed. AppleTalk Name Specify the name of the printer on the AppleTalk network. If you enter a name that is already assigned on your network, the AppleTalk name specified on the Jetdirect configuration page will be followed by a number to indicate that it is a duplicate. Type Identify the type of printer being advertised on the network. Up to two types can be displayed (for example, HP LaserJet and LaserWriter). Zone Select an available AppleTalk network zone for the printer. By default, the zone currently selected will be displayed. 76 Chapter 4 HP Jetdirect Embedded Web Server (V.31.xx) ENWW