HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 102
sntp client enable (Interface), sntp client enable, sntp broadcast client enable
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Clock Commands sntp client enable (Interface) The sntp client enable Interface Configuration (Ethernet, port-channel, VLAN) mode command enables the Simple Network Time Protocol (SNTP) client on an interface. This applies to both receive broadcast and anycast updates. To disable the SNTP client, use the no form of this command. Syntax sntp client enable no sntp client enable Parameters There are no parameters for this command. Default Setting The SNTP client is disabled on an interface. Command Mode Interface configuration (Ethernet, port-channel, VLAN) mode Command Usage Use the sntp broadcast client enable Global Configuration mode command to enable broadcast clients globally. Use the sntp anycast client enable Global Configuration mode command to enable anycast clients globally. Example The following command enables the SNTP client on Ethernet port e3. Console(config)# interface ethernet e3 Console(config-if)# sntp client enable 6-12 www.hp.com HP PC Blade Switch CLI Reference Guide