HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 227

QoS Commands set The set Policy-map Class Configuration mode command sets new values in the IP packet. Syntax set {dscp new-dscp | queue queue-id | cos new-cos} no set Parameters n new-dscp - Specifies a new DSCP value for the classified traffic. (Range: 0-63) n queue-id - Specifies an explicit queue ID for setting the egress queue. n new-cos - Specifies a new user priority for marking the packet. (Range: 0-7) Default Setting This command has no default configuration. Command Mode Policy-map Class Configuration mode Command Usage This command is mutually exclusive with the trust Policy-map Class Configuration command within the same policy map. Policy maps that contain set or trust Policy-map Class Configuration commands or that have ACL classifications cannot be attached to an egress interface by using the service-policy (Ethernet, Port-channel) Interface Configuration mode command. To return to the Policy-map Configuration mode, use the exit command. To return to privileged EXEC mode, use the end command. Example The following command sets the DSCP value in the packet to 56 for classes in in policy map called policy class map class1. Console (config)# policy-map policy1 Console (config-pmap)# class class1 Console (config-pmap-c)# set dscp 56 HP PC Blade Switch CLI Reference Guide www.hp.com 18-11