HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 411
ip internal-usage-vlan
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 411 highlights
VLAN Commands ip internal-usage-vlan The ip internal-usage-vlan Interface Configuration mode command reserves a VLAN as the internal usage VLAN of an interface. To return to the default configuration, use the no form of this command. Syntax ip internal-usage-vlan vlan-id no ip internal-usage-vlan Parameters n vlan-id - Specifies the ID of the internal usage VLAN. Default Setting The software reserves a VLAN as the internal usage VLAN of an interface. Command Mode Interface Configuration (Ethernet, port-channel) mode Command Usage n An internal usage VLAN is required when an IP interface is configured on an Ethernet port or port-channel. n This command enables the user to configure the internal usage VLAN of a port. If an internal usage VLAN is not configured and the user wants to configure an IP interface, an unused VLAN is selected by the software. n If the software selected a VLAN for internal use and the user wants to use that VLAN as a static or dynamic VLAN, the user should do one of the following: n Remove the IP interface. n Use this command to explicitly configure a different VLAN as the internal usage VLAN. n Create the VLAN and recreate the IP interface. Example The following command reserves an unused VLAN 1236 as the internal usage VLAN of ethernet port e41. Console(config)# interface ethernet e41 Console(config-if)# ip internal-usage-vlan 1236 HP PC Blade Switch CLI Reference Guide www.hp.com 28-15