HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 71
bridge multicast filtering
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Address Table Commands bridge multicast filtering The bridge multicast filtering Global Configuration mode command enables filtering multicast addresses. To disable filtering multicast addresses, use the no form of this command. Syntax bridge multicast filtering no bridge multicast filtering Parameters There are no parameters for this command. Default Setting Filtering multicast addresses is disabled. All multicast addresses are flooded to all ports. Command Mode Global Configuration mode Command Usage If multicast devices exist on the VLAN, do not change the unregistered multicast addresses state to drop on the switch ports. If multicast devices exist on the VLAN and IGMP-snooping is not enabled, the bridge multicast forward-all command should be used to enable forwarding all multicast packets to the multicast switches. Example The following command enables bridge multicast filtering. Console(config)# bridge multicast filtering HP PC Blade Switch CLI Reference Guide www.hp.com 5-3