HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 414
show interfaces switchport, port-channel
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 414 highlights
VLAN Commands show interfaces switchport The show interfaces switchport Privileged EXEC mode command displays the switchport configuration. Syntax show interfaces switchport {ethernet interface | port-channel port-channel-number} Parameters n interface - A valid Ethernet port number. n port-channel-number - A valid port-channel number. Default Setting This command has no default configuration. Command Mode Privileged EXEC mode Command Usage There are no user guidelines for this command. Example The following command displays the switchport configuration for Ethernet port e1. Console# show interface switchport ethernet e1 Port e1: VLAN Membership mode: General Operating parameters: PVID: 1 (default) Ingress Filtering: Enabled Acceptable Frame Type: All GVRP status: Enabled Protected: Enabled, Uplink is e45. Port e1 is member in: VLAN Name ---- ------- 1 default 8 VLAN008 11 VLAN011 19 IPv6 VLAN 72 VLAN0072 Egress Rule ----------untagged tagged tagged untagged untagged Type ------System Dynamic Static Static Static 28-18 www.hp.com HP PC Blade Switch CLI Reference Guide