HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 30
dot1x timeout supp-timeout
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
802.1x Commands dot1x timeout supp-timeout The dot1x timeout supp-timeout Interface Configuration mode command sets the time for the retransmission of an Extensible Authentication Protocol (EAP)-request frame to the client. To return to the default configuration, use the no form of this command. Syntax dot1x timeout supp-timeout seconds no dot1x timeout supp-timeout Parameters n seconds - Time in seconds that the device waits for a response to an EAP-request frame from the client before resending the request. (Range: 1-65535 seconds) Default Configuration Default timeout period is 30 seconds. Command Mode Interface configuration (Ethernet) mode Command Usage The default value of this command should be changed only to adjust for unusual circumstances, such as unreliable links or specific behavioral problems with certain clients and authentication servers. Example The following command sets the timeout period before retransmitting an EAP-request frame to the client to 3600 seconds. Console(config-if)# dot1x timeout supp-timeout 3600 2-10 www.hp.com HP PC Blade Switch CLI Reference Guide