HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 156
ip igmp snooping mrouter-time-out
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
IGMP Snooping Commands ip igmp snooping mrouter-time-out The ip igmp snooping mrouter-time-out Interface Configuration (VLAN) mode command configures the mrouter-time-out. The ip igmp snooping mrouter-time-out Interface Configuration (VLAN) mode command is used for setting the aging-out time after multicast device ports are automatically learned. To return to the default configuration, use the no form of this command. Syntax ip igmp snooping mrouter-time-out time-out no ip igmp snooping mrouter-time-out Parameters n time-out - Multicast device timeout in seconds. (Range: 1-2147483647) Default Setting The default value is 300 seconds. Command Mode Interface Configuration (VLAN) mode Command Usage There are no user guidelines for this command. Example In the following example, the multicast device timeout is configured to 200 seconds. Console(config)# interface vlan 2 Console(config-if)# ip igmp snooping mrouter-time-out 200 10-4 www.hp.com HP PC Blade Switch CLI Reference Guide