HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 88
show ports security, The following table describes the fields shown in the example.
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Address Table Commands show ports security The show ports security Privileged EXEC mode command displays the port-lock status. Syntax show ports security [ethernet interface | port-channel port-channel-number] Parameters n interface - A valid Ethernet port. n port-channel-number - A valid port-channel number. Default Setting This command has no default configuration. Command Mode Privileged EXEC mode Command Usage There are no user guidelines for this command. Example The following command displays all classes of port-lock status entries. Console# show ports security Port Status ---- ------- e1 Locked e2 Unlocked e3 Locked Learning -------Dynamic Dynamic Disabled Action ------Discard Discard, Shutdown Maximum ------3 28 8 Trap ------Enable Disable Frequency --------100 - The following table describes the fields shown in the example. Field Port Status Learning Action Maximum Trap Frequency Description Port number Locked/Unlocked Learning mode Action on violation Maximum addresses that can be associated on this port in Static Learning mode or in Dynamic Learning mode Indicates if traps are sent in case of a violation Minimum time between consecutive trap 5-20 www.hp.com HP PC Blade Switch CLI Reference Guide