HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 408
switchport general ingress-filtering disable
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 408 highlights
VLAN Commands switchport general ingress-filtering disable The switchport general ingress-filtering disable Interface Configuration mode command disables port ingress filtering. Ingress filtering discards frames to VLAN where port does not belong. To return to the default configuration, use the no form of this command. Syntax switchport general ingress-filtering disable no switchport general ingress-filtering disable Parameters There are no parameters for this command. Default Setting Ingress filtering is enabled. Command Mode Interface Configuration (Ethernet, port-channel) mode Command Usage There are no user guidelines for this command. Example The following commands disable port ingress filtering on Ethernet port e42. Console(config)# interface ethernet e42 Console(config-if)# switchport general ingress-filtering disable 28-12 www.hp.com HP PC Blade Switch CLI Reference Guide