HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 41
dot1x guest-vlan, dot1x guest-vlan enable
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
802.1x Commands dot1x guest-vlan The dot1x guest-vlan Interface Configuration mode command defines a guest VLAN. To return to the default configuration, use the no form of this command. Syntax dot1x guest-vlan no dot1x guest-vlan Parameters There are no parameters for this command. Default Setting No VLAN is defined as a guest VLAN. Command Mode Interface Configuration (VLAN) mode Command Usage Use the dot1x guest-vlan enable Interface Configuration mode command to enable unauthorized users on an interface to access the guest VLAN. If the guest VLAN is defined and enabled, the port automatically joins the guest VLAN when the port is unauthorized and leaves it when the port becomes authorized. To be able to join or leave the guest VLAN, the port should not be a static member of the guest VLAN. Example The following command defines VLAN 2 as a guest VLAN. Console# Console# configure Console(config)# vlan database Console(config-vlan)# vlan 2 Console(config-vlan)# exit Console(config)# interface vlan 2 Console(config-if)# dot1x guest-vlan HP PC Blade Switch CLI Reference Guide www.hp.com 2-21