HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 108
show sntp status, Time Protocol SNTP.
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Clock Commands show sntp status The show status Privileged EXEC mode command shows the status of the Simple Network Time Protocol (SNTP). Syntax show sntp status Parameters There are no parameters for this command. Default Setting This command has no default configuration. Command Mode Privileged EXEC mode Command Usage There are no user guidelines for this command. Example The following command shows the status of the SNTP. Console# show sntp status Clock is synchronized, stratum 4, reference is 176.1.1.8, unicast Reference time is AFE2525E.70597B34 (00:10:22.438 PDT Jul 5 2006) Unicast servers: Server Status Last Response ----------176.1.1.8 176.1.8.179 ------Up Unknown 19:58:22.289 PDT Feb 19 2006 12:17.17.987 PDT Feb 19 2006 Offset [mSec] -----7.33 8.98 Delay [mSec] -----117.79 189.19 Anycast Server: Server Interface Status Last Response --------176.1.11.8 ------- ----- VLAN 118 Up 9:53:21.789 PDT Feb 19 2006 Offset [mSec] -----7.19 Delay [mSec] ----119.89 Broadcast: Interface --------176.9.1.1 Interface --------VLAN 119 Last Response 19:17:59.792 PDT Feb 19 2006 6-18 www.hp.com HP PC Blade Switch CLI Reference Guide