HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 238
wrr-queue threshold, no qos wrr-queue threshold tengigabitethernet
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
QoS Commands wrr-queue threshold The wrr-queue threshold Global Configuration mode command assigns queue thresholds globally. To return to the default configuration, use the no form of this command. Syntax qos wrr-queue threshold gigabitethernet queue-id threshold-percentage no qos wrr-queue threshold gigabitethernet queue-id no qos wrr-queue threshold tengigabitethernet queue-id Parameters n gigabitethernet - Indicates that the thresholds are to be applied to Gigabit Ethernet ports. n queue-id - Specifies the queue number to which the threshold is assigned. n threshold-percentage 0,1,2 - Specifies the queue threshold percentage value. Each value is separated by a space. (Range: 0-100) Default Setting 80 percent for all thresholds. Command Mode Global Configuration mode. Command Usage The packet refers to a certain threshold by the conformance level. If threshold 0 is exceeded, packets with the corresponding DP (Drop Precedence) are dropped until the threshold is no longer exceeded. However, packets assigned to threshold 1 or 2 continue to be queued and sent as long as the second or third threshold is not exceeded. Example The following command assigns a threshold of 80 percent to WRR queue 1. Console (config)# qos wrr-queue threshold gigabitethernet 1 18-22 www.hp.com HP PC Blade Switch CLI Reference Guide