HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 277
snmp-server user
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 277 highlights
SNMP Commands snmp-server user The snmp-server user Global Configuration mode command configures a new SNMP Version 3 user. To remove a user, use the no form of this command. Syntax snmp-server user username groupname [remote engineid-string] [auth-md5 password | auth-sha password | auth-md5-key md5-des-keys | auth-sha-key sha-des-keys] no snmp-server user username [remote engineid-string] Parameters n username - Specifies the name of the user on the host that connects to the agent. (Range: 1-30 characters) n groupname - Specifies the name of the group to which the user belongs. (Range: 1-30 characters) n engineid-string - Specifies the engine ID of the remote SNMP entity to which the user belongs. The engine ID is a concatenated hexadecimal string. Each byte in the hexadecimal character string is two hexadecimal digits. Each byte can be separated by a period or colon. (Range: engineID must contain from 9 through 64 hexadecimal digits) n auth-md5 password - Indicates the HMAC-MD5-96 authentication level. The user should enter a password for authentication and generation of a DES key for privacy. (Range: 1-32 characters) n auth-sha password - Indicates the HMAC-SHA-96 authentication level. The user should enter a password for authentication and generation of a DES key for privacy. (Range: 1-32 characters) n auth-md5-key md5-des-keys - Indicates the HMAC-MD5-96 authentication level. The user should enter a concatenated hexadecimal string of the MD5 key (MSB) and the privacy key (LSB). If authentication is only required, 16 bytes should be entered; if authentication and privacy are required, 32 bytes should be entered. Each byte in the hexadecimal character string is two hexadecimal digits. Each byte can be separated by a period or colon. (16 or 32 bytes) n auth-sha-key sha-des-keys-Indicates the HMAC-SHA-96 authentication level. The user should enter a concatenated hexadecimal string of the SHA key (MSB) and the privacy key (LSB). If authentication is only required, 20 bytes should be entered; if authentication and privacy are required, 36 bytes should be entered. Each byte in the hexadecimal character string is two hexadecimal digits. Each byte can be separated by a period or colon. (20 or 36 bytes) Default Setting No group entry exists. Command Mode Global Configuration mode Command Usage If auth-md5 or auth-sha is specified, both authentication and privacy are enabled for the user. HP PC Blade Switch CLI Reference Guide www.hp.com 21-5