HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 74
bridge multicast forward-all, remove, ethernet, port-channel
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Address Table Commands bridge multicast forward-all The bridge multicast forward-all Interface Configuration (VLAN) mode command enables forwarding all multicast packets on a port. To restore the default configuration, use the no form of this command. Syntax bridge multicast forward-all {add | remove} {ethernet interface-list | port-channel port-channel-number-list} no bridge multicast forward-all Parameters n add - Force forwarding all multicast packets. n remove - Do not force forwarding all multicast packets. n interface-list - Separate nonconsecutive Ethernet ports with a comma and no spaces; a hyphen is used to designate a range of ports. n port-channel-number-list - Separate nonconsecutive port-channels with a comma and no spaces; a hyphen is used to designate a range of port-channels. Default Setting This setting is disabled. Command Mode Interface Configuration (VLAN) mode Command Usage There are no user guidelines for this command. Example The following command configures the device to forward all multicast packets on port e8. Console(config)# interface vlan 1 Console(config-if)# bridge multicast forward-all add ethernet e8 5-6 www.hp.com HP PC Blade Switch CLI Reference Guide