HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 93
clock timezone, Minutes difference from UTC. Range: 0
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Clock Commands clock timezone The clock timezone Global Configuration mode command sets the time zone for display purposes. To set the time to the Coordinated Universal Time (UTC), use the no form of this command. Syntax clock timezone hours-offset [minutes minutes-offset] [zone acronym] no clock timezone Parameters n hours-offset - Hours difference from UTC. (Range: -12 - +13) n minutes-offset - Minutes difference from UTC. (Range: 0-59 minutes) n acronym - The acronym of the time zone. (Range: Up to 4 characters) Default Setting Clock set to UTC. Command Mode Global Configuration mode Command Usage The system internally keeps time in UTC, so this command is used only for display purposes and when the time is manually set. Example The following command sets the time zone to 6 hours difference from UTC. Console(config)# clock timezone -6 zone CST HP PC Blade Switch CLI Reference Guide www.hp.com 6-3