HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 232
police aggregate
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
QoS Commands police aggregate The police aggregate Policy-map Class Configuration mode command applies an aggregate policer to multiple classes within the same policy map. To remove an existing aggregate policer from a policy map, use the no form of this command. Syntax police aggregate aggregate-policer-name no police aggregate aggregate-policer-name Parameters n aggregate-policer-name - Specifies the name of the aggregate policer. Default Setting This command has no default configuration. Command Mode Policy-map Class Configuration mode Command Usage An aggregate policer can be applied to multiple classes in the same policy map; An aggregate policer cannot be applied across multiple policy maps or interfaces. To return to the Policy-map Configuration mode, use the exit command. To return to the Privileged EXEC mode, use the end command. Example The following command applies the aggregate policer called policer1 to a class called class1 in policy map called policy1. Console(config)# policy-map policy1 Console(config-pmap)# class class1 Console(config-pmap-c)# police aggregate policer1 18-16 www.hp.com HP PC Blade Switch CLI Reference Guide