HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 144
gvrp enable (Interface), gvrp enable
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
GVRP Commands gvrp enable (Interface) The gvrp enable Interface Configuration (Ethernet, port-channel) mode command enables GVRP on an interface. To disable GVRP on an interface, use the no form of this command. Syntax gvrp enable no gvrp enable Parameters There are no parameters for this command. Default Setting GVRP is disabled on all interfaces. Command Mode Interface Configuration (Ethernet, port-channel) mode Command Usage An access port does not dynamically join a VLAN because it is always a member in only one VLAN. Membership in an untagged VLAN is propagated in the same way as in a tagged VLAN. That is, the PVID is manually defined as the untagged VLAN VID. Example The following command enables GVRP on Ethernet port e45. Console(config)# interface ethernet e45 Console(config-if)# gvrp enable 9-2 www.hp.com HP PC Blade Switch CLI Reference Guide