HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 79
port security mode, dynamic
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Address Table Commands port security mode The port security mode Interface Configuration mode command configures the port security mode. To return to the default configuration, use the no form of this command. Syntax port security mode {lock | dynamic} no port security mode Parameters n lock - Saves the current dynamic MAC addresses associated with the port and disables learning, relearning and aging. n dynamic - Deletes the current dynamic MAC addresses associated with the port and learns up to the maximum number addresses allowed on the port. Relearning and aging are enabled. Default Setting This setting is disabled. Command Mode Interface Configuration (Ethernet, port-channel) mode Command Usage There are no user guidelines for this command. Example In the following command, the port security mode is set to dynamic for Ethernet interface e7. Console(config)# interface ethernet e7 Console(config-if)# port security mode dynamic HP PC Blade Switch CLI Reference Guide www.hp.com 5-11