HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 89

Address Table Commands show ports security addresses The show ports security addresses Privileged EXEC mode command displays the current dynamic addresses in locked ports. Syntax show ports security addresses [ethernet interface | port-channel port-channel-number] Parameters n interface - A valid Ethernet port. n port-channel-number - A valid port-channel number Default Setting This command has no default configuration. Command Mode Privileged EXEC Mode Command Usage There are no user guidelines for this command. Example The following command displays the dynamic addresses in currently locked ports. Console# show ports security addresses Port Status Learning ---- -------- -------- e1 Disabled Lock e2 Disabled Lock e3 Enabled Max-addresses e4 Port is a member in port-channel ch1 e5 Disabled Lock e6 Enabled Max-addresses ch1 Enabled Max-addresses ch2 Enabled Max-addresses Current ------0 0 0 0 Maximum ------1 1 1 1 10 50 128 The following command displays the dynamic addresses in currently locked port e1. Console# show ports security addresses ethernet e1 Port Status ---- -------- e1 Disabled Learning -------Lock Current ------- Maximum ------1 HP PC Blade Switch CLI Reference Guide www.hp.com 5-21