HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 347
Syslog Commands, logging
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 347 highlights
24 Syslog Commands logging on The logging on Global Configuration mode command controls error message logging. This command sends debug or error messages to a logging process, which logs messages to designated locations asynchronously to the process that generated the messages. To disable the logging process, use the no form of this command. Syntax logging on no logging on Parameters There are no parameters for this command. Default Setting Logging is enabled. Command Mode Global Configuration mode Command Usage The logging process controls the distribution of logging messages at various destinations, such as the logging buffer, logging file or syslog server. Logging on and off at these destinations can be individually configured using the logging buffered, logging file, and logging Global Configuration mode commands. However, if the logging on command is disabled, no messages are sent to these destinations. Only the console receives messages. Example The following command enables logging error messages. Console(config)# logging on HP PC Blade Switch CLI Reference Guide www.hp.com 24-1