HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 322
spanning-tree guard root
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 322 highlights
Spanning-Tree Commands spanning-tree guard root The spanning-tree guard root Interface Configuration (Ethernet, port-channel) mode command enables root guard on all spanning tree instances on the interface. Root guard prevents the interface from becoming the root port of the device. To disable root guard on the interface, use the no form of this command. Syntax spanning-tree guard root no spanning-tree guard root Parameters There are no parameters for this command. Default Setting Root guard is disabled. Command Mode Interface Configuration (Ethernet, port-channel) mode Command Usage Root guard can be enabled when the device operates in STP, RSTP, and MSTP. When root guard is enabled, the port changes to the alternate state if spanning-tree calculations selects the port as the root port. Example The following command prevents Ethernet port e1 from being the root port of the device. console(config) # interface ethernet e1 console(config-mst) # spanning-tree guard root 22-26 www.hp.com HP PC Blade Switch CLI Reference Guide