HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 38
Advanced Features, dot1x auth-not-req
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
802.1x Commands Advanced Features dot1x auth-not-req The dot1x auth-not-req Interface Configuration mode command enables unauthorized devices access to the VLAN. To disable access to the VLAN, use the no form of this command. Syntax dot1x auth-not-req no dot1x auth-not-req Parameters There are no parameters for this command. Default Configuration Access is enabled. Command Mode Interface Configuration (VLAN) mode Command Usage An access port cannot be a member in an unauthenticated VLAN. The native VLAN of a trunk port cannot be an unauthenticated VLAN. For a general port, the PVID can be an unauthenticated VLAN (although only tagged packets would be accepted in the unauthorized state.) Example The following command enables access to the VLAN to unauthorized devices. Console(config-if)# dot1x auth-not-req 2-18 www.hp.com HP PC Blade Switch CLI Reference Guide