HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 283
snmp-server host
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 283 highlights
SNMP Commands snmp-server host The snmp-server host Global Configuration mode command specifies the recipient of Simple Network Management Protocol Version 1 or Version 2 notifications. To remove the specified host, use the no form of this command. Syntax snmp-server host {ip-address | hostname} community-string [traps | informs] [1 | 2] [udp-port port] [filter filtername] [timeout seconds] [retries retries] no snmp-server host {ip-address | hostname} [traps | informs] Parameters n ip-address - Specifies the IP address of the host (targeted recipient). n hostname - Specifies the name of the host. (Range:1-158 characters) n community-string - Specifies a password-like community string sent with the notification operation. (Range: 1-20) n traps - Indicates that SNMP traps are sent to this host. If unspecified, SNMPv2 traps are sent to the host. n informs - Indicates that SNMP informs are sent to this host. Not applicable to SNMPv1. n 1 - Indicates that SNMPv1 traps will be used. n 2 - Indicates that SNMPv2 traps will be used. n port - Specifies the UDP port of the host to use. If unspecified, the default UDP port number is 162. (Range: 1-65535) n filtername - Specifies a string that defines the filter for this host. If unspecified, nothing is filtered. (Range: 1-30 characters) n seconds - Specifies the number of seconds to wait for an acknowledgment before resending informs. If unspecified, the default timeout period is 15 seconds. (Range: 1-300) n retries - Specifies the maximum number of times to resend an inform request. If unspecified, the default maximum number of retries is 3. (Range: 1-255) Default Setting This command has no default configuration. Command Mode Global Configuration mode Command Usage When configuring an SNMPv1 or SNMPv2 notification recipient, a notification view for that recipient is automatically generated for all the MIB. When configuring an SNMPv1 notification recipient, the Informs option cannot be selected. If a trap and inform are defined on the same target, and an inform was sent, the trap is not sent. HP PC Blade Switch CLI Reference Guide www.hp.com 21-11