HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 374
show sessions, There is no default configuration for this command.
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 374 highlights
System Management Commands show sessions The show sessions User EXEC mode command lists open Telnet sessions. Syntax show sessions Parameters There are no parameters for this command. Default Setting There is no default configuration for this command. Command Mode User EXEC mode Command Usage There are no user guidelines for this command. Example The following command lists open Telnet sessions. Console> show sessions Connection Host Address Port Byte ---------- ---------- ----- ---- 1 Remote device 172.16.1.1 23 89 2 172.16.1.2 172.16.1.2 23 8 The following table describes significant fields shown in the example. Field Connection Host Address Port Byte Description Connection number. Remote host to which the device is connected through a Telnet session. IP address of the remote host. Telnet TCP port number Number of unread bytes for the user to see on the connection. 25-12 www.hp.com HP PC Blade Switch CLI Reference Guide