HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 407
switchport general pvid, Port <Number>, extension, separated-bridge exist
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 407 highlights
VLAN Commands switchport general pvid The switchport general pvid Interface Configuration mode command configures the PVID when the interface is in general mode. To return to the default configuration, use the no form of this command. Syntax switchport general pvid vlan-id no switchport general pvid Parameters n vlan-id - Specifies the PVID (Port VLAN ID). Default Setting If the default VLAN is enabled, PVID = 1. Otherwise, PVID=4095. Command Mode Interface Configuration (Ethernet, port-channel) mode Command Usage There are no user guidelines for this command. . When MSTP-to-RSTP is enabled (enabled by default) attempting to put any switch port into trunk or general mode will cause the following error message: Port , extension separated-bridge exist. This feature must be disabled before the switch can support these modes. Please see spanning-tree mst mstp-rstp for more information. Example The following commands configure the PVID for Ethernet port e42, when the interface is in general mode. Console(config)# interface ethernet e42 Console(config-if)# switchport general pvid 234 HP PC Blade Switch CLI Reference Guide www.hp.com 28-11