HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 33

802.1x Commands Quiet period: 60 Seconds Tx period:30 Seconds Max req: 2 Supplicant timeout: 30 Seconds Server timeout: 30 Seconds Session Time (HH:MM:SS): 08:19:17 MAC Address: 00:08:78:32:98:78 Authentication Method: Remote Termination Cause: Supplicant logoff Authenticator State Machine State: HELD Backend State Machine State: IDLE Authentication success: 9 Authentication fails: 1 The following table describes significant fields shown in the example: Field Port Admin mode Oper mode Reauth Control Reauth Period Username Quiet period Tx period Max req Supplicant timeout Description The port number. The port admin mode. Possible values: FoTrce-auth, Force-unauth, Auto. The port oper mode. Possible values: Authorized, Unauthorized or Down. Reauthentication control. Reauthentication period. The username representing the identity of the Supplicant. This field shows the username in case the port control is auto. If the port is Authorized, it shows the username of the current user. If the port is unauthorized it shows the last user that was authenticated successfully. The number of seconds that the device remains in the quiet state following a failed authentication exchange (for example, the client provided an invalid password). The number of seconds that the device waits for a response to an Extensible Authentication Protocol (EAP)-request/identity frame from the client before resending the request. The maximum number of times that the device sends an Extensible Authentication Protocol (EAP)-request frame (assuming that no response is received) to the client before restarting the authentication process. Time in seconds the switch waits for a response to an EAP-request frame from the client before resending the request. HP PC Blade Switch CLI Reference Guide www.hp.com 2-13