HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 29
dot1x max-req
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
802.1x Commands dot1x max-req The dot1x max-req Interface Configuration mode command sets the maximum number of times that the device sends an Extensible Authentication Protocol (EAP)-request/identity frame (assuming that no response is received) to the client, before restarting the authentication process. To return to the default configuration, use the no form of this command. Syntax dot1x max-req count no dot1x max-req Parameters n count - Number of times that the device sends an EAP-request/identity frame before restarting the authentication process. (Range: 1-10) Default Configuration The default number of times is 2. Command Mode Interface Configuration (Ethernet) mode Command Usage The default value of this command should be changed only to adjust for unusual circumstances, such as unreliable links or specific behavioral problems with certain clients and authentication servers. Example The following command sets the number of times that the device sends an EAP-request or identity frame, to 6. Console(config)# interface ethernet e16 Console(config-if)# dot1x max-req 6 HP PC Blade Switch CLI Reference Guide www.hp.com 2-9