HP BladeSystem bc2800 Command Line Interface Reference Guide HP BladeSystem PC - Page 136
The following command displays counters for Ethernet port e1
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Ethernet Configuration Commands The following command displays counters for Ethernet port e1: Console# show interfaces counters ethernet e1 Port -----e1 InOctets ----------183892 InUcastPkts 0 InMcastPkts ----------0 InBcastPkts ----------0 Port -----e1 OutOctets ----------9188 OutUcastPkts 0 OutMcastPkts -----------0 OutBcastPkts -----------0 FCS Errors: 8 Single Collision Frames: 0 Late Collisions: 0 Oversize Packets: 0 Internal MAC Rx Errors: 0 Symbol Errors: 0 Received Pause Frames: 0 Transmitted Pause Frames: 0 The following table describes the fields shown in the example. Field InOctets InUcastPkts InMcastPkts InBcastPkts OutOctets OutUcastPkts OutMcastPkts OutBcastPkts FCS Errors Single Collision Frames Late Collisions Oversize Packets Internal MAC Rx Errors Description Counted received octets. Counted received unicast packets. Counted received multicast packets. Counted received broadcast packets. Counted transmitted octets. Counted transmitted unicast packets. Counted transmitted multicast packets. Counted transmitted broadcast packets. Counted received frames that are an integral number of octets in length but do not pass the FCS check. Counted frames that are involved in a single collision, and are subsequently transmitted successfully. Number of times that a collision is detected later than one slot time into the transmission of a packet. Counted frames received that exceed the maximum permitted frame size. Counted frames for which reception fails due to an internal MAC sublayer receive error. 8-18 www.hp.com HP PC Blade Switch CLI Reference Guide