HP LaserJet 3052 Service Manual - Page 136
Separation-pad assembly, CAUTION,
View all HP LaserJet 3052 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Separation-pad assembly 1. Remove the control-panel bezel. See Control-panel bezel on page 112. 2. Remove five screws (callout 1) and the sheet-metal plate. CAUTION Do not touch the grey separation pad. Skin oils and fingerprints on the separation pad might cause paper-feed problems. Press down on the plate as the screws are removed. Four compression springs are under the plate. The separation-pad assembly also has one compression spring attached to the shield. Be careful not to lose any springs when you remove the shield. NOTE The separation-pad set and the separation-pad assembly are two different assemblies. The separation-pad set consists of the pad, clear plastic sheet, and the pad cover. The separation-pad set is a user-replaceable assembly. The separation-pad assembly consists of the separation lever, tension spring, feed arm, and the components of the separation-pad set. The separation-pad assembly is not a userreplaceable assembly. Only trained service personnel should attempt to replace the separation-pad assembly. Figure 5-19 Removing the separation-pad assembly (1 of 3) 116 Chapter 5 Removal and replacement ENWW