HP LaserJet 3052 Service Manual - Page 232
Where to look for jams, Print cartridge area, In the ADF
View all HP LaserJet 3052 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
Where to look for jams Jams can occur in these locations: ● Inside the all-in-one ● In output areas ● In the ADF Find and remove the jam by using the instructions on the following pages. If the location of the jam is not obvious, first look inside the all-in-one. Loose toner might remain in the all-in-one after a jam. This problem typically resolves itself after a few sheets have been printed. Print cartridge area To clear a jam in the print cartridge area, perform the following steps: CAUTION Do not use sharp objects, such as tweezers or needle-nose pliers, to remove jams. Damage caused by sharp objects will not be covered by the warranty. When removing jammed media, pull the jammed media straight away from the all-in-one. Pulling jammed media out of the all-in-one at an angle can damage the all-in-one. 1. Open the print-cartridge door, and remove the print cartridge. CAUTION To prevent damage to the print cartridge, minimize its exposure to direct light. 2. With both hands, grasp the side of the media that is most visible (this includes the middle), and carefully pull it free from the all-in-one. HP LaserJet 3050 212 Chapter 6 Troubleshooting HP LaserJet 3052/3055 ENWW