HP LaserJet 3052 Service Manual - Page 253
s are skewed crooked., Cause, Solution, Parts of the around the edges are not printing.
View all HP LaserJet 3052 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
Pages are skewed (crooked). Cause The ADF input tray is too full. The media does not meet HP specifications. Solution Remove some of the sheets. The HP LaserJet 3050 all-in-one ADF input tray can hold up to 30 sheets of 80-g/m2 (20-lb) bond-weight paper. Remove some of the sheets. The HP LaserJet 3052/3055 allin-one ADF input tray can hold up to 50 sheets of 80-g/m2 (20lb) bond-weight paper. Remove some of the sheets. The main input tray can hold up to 250 sheets of 80-g/m2 (20-lb) bond-weight paper. Make sure that the media meets specifications detailed in the HP LaserJet Printer Family Print Media Guide. Parts of the page around the edges are not printing. Cause Solution The product cannot print to the edge of the media. The printer To fit the image into this printable area, slightly reduce the size has minimum margins on each edge of 6 mm (0.25 inch). of the image. If copying, the reduction setting is incorrect. Copied images will be clipped if the image on the original is too close to the edge of the original. The paper size setting is incorrect. Set the correct page size on the control-panel menu. ENWW Scan/copy image-quality problems 233